I know there are a lot of audiophiles out there who like to make their own cables. Since every part is important, I felt like a store was needed to provide the hard to find parts that go into making a great cable. Here it is! These are the exact same wires, heat shrinks, connectors, solder, and other cable making components that I use in my wire. These are the best available. All wires are annealed to dead soft*  and of the highest purity possible. All parts are sold in reasonable quantities so that you may build the cable of your dreams and save a substantial amount of money. Please email for your specifics if you require something that is not listed. Have fun.

Exclusive Teflon RCA Plug Kit

For years I have wanted to get the Brass out of my cables. Brass is a terrible conductor and adds a real dullness to the sound. Silver is the best conductor followed by Copper and then Gold. Brass is way further down the list. The reason that RCA connectors are made of Brass is ease of manufacture as well as malleability. Conductive ability is not on the list of positives for this type of construction. Finally, I have designed what I feel is the finest connector on the market.. PERIOD. It uses a solid, pure Teflon base that has been machined to accept a center pin and ground conductor. Teflon is one of the most inert substances on the planet. The Teflon plug surrounds the RCA connections on your equipment as well as the cable wires to insure a quiet, interference free sound. Getting rid of the Brass allows the use of super conductor metals which insure the pristine delivery of your sonic pleasures. The lack of plating creates a circuit with no barriers. Why make a cable that is painstakingly designed to deliver all information and then plug up both ends with a poor conducting Brass connectors? Why use 99.999% purity wires and then use Brass in the circuit? Brass is really just copper with impurities in it. Don't be fooled by connectors with exotic plating like Platinum, Gold, etc. They are still just Brass plugs.

The first design features a 99.99% C 101 Electrolytic Copper center pin. One of the best conductors that you can get. The return is made of a thin strip of Copper sheet. This thin strip has a very small contact point resulting in great detail. The sound of Copper is very full and rich with good bass. The second design features a pure Silver tube center pin and again a thin Silver return to insure a minimal contact point. Silver has a sound of great detail, air and space. The thing that really impressed me the first time that I heard this design was the spaciousness and unbelievable detail.  Next I noticed the black background. A product of the solid Teflon plug. These plugs sound as good or better than the WBT NextGen's which sell for $50 EACH. These plugs blow away and are more reliable than the Eichman Bullet at $25 EACH. These plugs sound better than any Brass plug made! No one else has them. Kit includes all parts and instructions to install plugs. Some degree of skill is necessary.

Solid Teflon Plug Kit Copper $45/four

                            Solid Teflon Plug Kit Silver $75.00/four                              

Click Here for Teflon Instructions

                                                                                         Non Insulated Wire

            Home         |         About Us           |            Dealers            |         Contact              |            Policies          

Copyright Aural Thrills Audio 2006